Program Dish Remote to TV (Detailed Step + Bonus Tip)

As a universal remote, the Dish remote is a great solution for reducing device clutter and saving money by consolidating control into one handy remote. Then do you know how to program Dish remote to TV? Dish offers different remote models, and each may be designed to pair with your TV in specific ways. But don’t worry, you can follow this guide to pair your Direct remote with specific steps. Let’s dive in!

Identify Your Dish Remote

Before programming Dish remote to TV, make sure you know the model of your remote, as the pairing process can vary depending on the specific Dish remote you have.

The main difference in the pairing process is that models 40.0 and higher follow a different procedure compared to models 32.0 and lower. Typically, the 40.0 and higher remotes come with Hopper, Joey, and Wally receivers, while the 32.0 remotes are usually included with ViP receivers.

How to Program Old Dish Remote to TV

How to pair Dish remote to TV? Once you’ve identified your Dish remote model, let’s begin the pairing process with the older Dish models.

Step 1. Turn on your TV, and point your Dish remote control at the TV.

Step 2. Press and hold the TV button until four mode buttons light up, then release the button and wait for it to start blinking.

Step 3. Press and release the Power button on your remote. When blinking changes to a solid light, proceed to the next step.

Step 4. Press the Up button on your remote and wait a few seconds. If the device you’re pairing turns off, proceed to the next step. If it stays on, continue pressing Up every few seconds until it turns off.

Step 5. When your device turns off, press the Pound button (#) to save the pairing. Wait for the TV button you selected to flash three times and the pairing process should be complete.

Step 6. Test the new connection by giving your paired device a few commands. If it’s still not working correctly, contact Dish support for further assistance.

How to Program New Dish Remote to TV

If you own the model 40.0 or higher Dish remote, you are supposed to follow the below pairing procedure.

Step 1. If your remote has a Home button, press it twice. Otherwise, press the Menu button once. Navigate to Settings > Remote Control.

Step 2. Choose the option that you want to pair with your Dish remote control under Device.

Step 3. Select the Pairing Wizard to finish your Dish remote programming process with step-by-step instructions.

Step 4. Test the new connection by giving your paired device a few commands. If it’s not working properly, try pairing again using a different code. Sometimes, multiple codes can work.

Note: Is Program Dish remote to TV without code not working possible? Dish official states that pairing codes are required to program any Dish remote to work with your TV or media player. However, the Pairing Wizard on newer Dish remotes provides onscreen instructions and helps automate the code-finding process, making it much easier.

Bonus: Use a Universal Remote App to Control Your TV

Additionally, if your Dish remote isn’t working, you can use BoostVision’s virtual universal remote as a reliable backup. This remote is also a universal remote, but it offers more convenience since it’s on your mobile device. You won’t have to worry about losing it or running out of batteries.

There are two different modes, including the IR remote mode and the smart universal remote mode. Here’re the detailed instructions for the smart remote mode.

Step 1. Install the universal remote app on your mobile device. Both smartphones and tablets are OK. Make sure your mobile device and TV are covered by the same wireless network.

Step 2. Launch the virtual remote and tap the top “Tap to connect” to choose your TV from the device list to connect.

Step 3. When the connection succeeds, you can click the onscreen virtual buttons to control your television.

Bottom Line

How to connect Dish remote to TV? The first thing you need to do is to check the model of your Dish remote and then follow the corresponding steps to match your devices. What’s more, if you have never used any remote control apps, it’s time to install one and enjoy its added convenience!

How to Program Dish Remote to TV FAQ

Q: How do I program my DISH remote to control my TV?

You need to check the model of your Dish remote and then follow the corresponding steps to match your devices.

Q: How do I find my TV code for remote?

You can check the user manual of the remote, find the code online, or ask a remote shop for assistance.