Element TV Remote Not Working: 5 Easy Solutions

Is your Element TV remote not working? Don’t panic; there are several steps you can take to fix the issue before deciding on a replacement. Let’s walk through the common reasons behind this problem and how you can solve them, along with a recommendation for a simple, convenient solution.

Why Is the Element TV Remote Not Working

There are several common reasons when the Element remote not working happens, ranging from simple issues like dead batteries to more complex pairing problems. Sometimes, signal obstructions or software glitches can also cause your remote to stop functioning. Understanding the root cause will help you resolve the issue efficiently.

• Dead or weak batteries: One of the most frequent causes for a non-working Element Roku TV remote isdead or weak batteries. It’s easy to overlook, but fresh, properly installed batteries are crucial for proper remote functionality.
• Pairing issues: If the remote is not communicating with your TV, it might be due to a pairing problem. Many Element remotes use Bluetooth or IR signals to sync with the TV, and if this connection is lost, the remote won’t work.
• Signal obstruction: Objects in the path of the remote’s signal can prevent it from working. The infrared (IR) signals that the remote uses to communicate with the TV need a clear line of sight to function properly.
• Software glitch: Sometimes, the problem lies with the TV’s software or system. A glitch can cause the remote to stop working, even if the batteries are fine and there are no physical obstructions.
• Faulty remote: If none of the above solutions work, the remote itself may be faulty or damaged, requiring a replacement.

How to Fix the Element TV Remote Not Working

To restore your Element TV remote, start by replacing the batteries. Below are detailed solutions for fixing your remote, including step-by-step tutorials to guide you through each process.

Fix 1. Replace the Batteries

Start by replacing the batteries in your remote. Make sure to use high-quality, fresh batteries, and check the battery contacts for any corrosion or dirt.

Step 1. Open the battery compartment on the back of the remote.

Step 2. Remove the old batteries and check for any corrosion or dirt in the compartment. Clean the contacts with a dry cloth if needed.

Step 3. Insert new batteries, ensuring they are properly aligned with the positive and negative ends as indicated inside the compartment.

Step 4. Close the compartment and test the remote by pressing any button to see if it responds to your TV.

If you find Element TV remote not working with new batteries, try the next solution.

Fix 2. Re-pair the Remote

Sometimes, your Element Roku TV remote not working is due to a pairing issue between the remote and the TV. This is common in Roku devices where the remote needs to be paired via Bluetooth or other wireless methods.

Step 1. Remove the batteries from your remote.

Step 2. Unplug the TV from the power outlet for about 30 seconds, then plug it back in.

Step 3. Reinsert the batteries into the remote and locate the pairing button inside the battery compartment.

Step 4. Press and hold the pairing button until the pairing light begins to flash. This will signal that the remote is searching for a connection with the TV.

Step 5. Wait for the on-screen pairing instructions to appear on your TV, and follow them to complete the process.

Step 6. Once paired, test the remote to confirm it’s working.

Fix 3. Clear Obstructions

Ensure that nothing is blocking the signal from the remote to the TV’s IR sensor:

Step 1: Stand directly in front of the TV and ensure that there are no objects like books, furniture, or decorations blocking the line of sight between the remote and the TV.

Step 2: Make sure the TV’s IR sensor (usually located at the bottom of the screen) is not covered by anything, such as dust, dirt, or a sticker.

Step 3: Remove any items that might be blocking the signal, such as other electronics, plants, or large objects.

Step 4: Test the remote again by pointing it directly at the TV to see if it works.

If there are no obstructions and the remote still doesn’t respond, the next steps are to check for software glitches.

Fix 4. Restart the Remote

Restarting your Element TV remote can help resolve software glitches or temporary issues:

Step 1. Remove the batteries from your remote control.

Step 2. Press and hold the power button on the remote control for 25 seconds.

Step 3. Insert the batteries back and check if the remote is functional.

Fix 5. Restart or Reset the TV

If restarting the remote doesn’t work, there might be software glitches or temporary issues with the TV system, and restarting or resetting it can help resolve these issues.

• Start by restarting the TV:

Step 1. Unplug the TV from the wall outlet.

Step 2. Leave the TV unplugged for at least 30 seconds to ensure the system has time to reset.

Step 3. After 30 seconds, plug the TV back in and turn it on using the power button on the TV (not the remote).

Step 4. Check if the remote starts working again. If the problem persists, perform a factory reset on your TV.

• Then, try resetting the TV (if needed):

The steps below will clear all your info, settings, and downloaded apps on the TV, which means the TV will revert to factory mode.

Step 1. Go to the Settings menu on your TV using the physical buttons on the TV.

Step 2. Navigate to System > Advanced System Settings > Factory Reset (on different models, there might be a few differences).

Step 3. Follow the on-screen instructions to reset your TV to its default settings.

Step 4. After the reset, re-pair your remote as instructed above.

Consider a Universal Remote Replacement

If none of the above solutions work and your Element TV remote replacement is necessary, consider using the Universal TV Remote app from BoostVision. This app can control your TV via Wi-Fi or infrared (IR) signals (if your device has an IR blaster), allowing you to use your smartphone or tablet as a remote control. It’s compatible with a wide range of TV brands, including Element, Samsung, LG, Vizio, Sony, and Hisense.

Step 1. Download the Universal TV Remote appfrom the app store on your smartphone or tablet.

Step 2. Launch the app on your mobile device and choose IR TV Remote. If you have Element Roku TV, both modes are feasible.

Step 3. While your Element TV is on, follow the on-screen instructions to program the remote to your Element TV, such as pressing the volume buttons. Here, you don’t need to enter the Element TV remote codes manually.

Step 4. Once connected, you can control your TV just like a physical remote—volume, channels, power, and more—straight from your phone.

Conclusion

No one likes a malfunctioning remote, but with a little troubleshooting, you can often get it working again. If not, using the Universal TV Remote app offers a convenient alternative that supports a wide range of TVs, ensuring you’re never far from your favorite channels. Keep this guide handy, and you’ll be back in control in no time!

Element TV Remote Not Working FAQ

Q: How do you reset the Element TV remote?

Remove the batteries from your remote control, then press and hold the power button on the remote control for 25 seconds, next insert the batteries back, and check if the remote is functional.

Q: How to work Element TV without remote?

• Use the TV’s physical buttons: Most Element TVs have physical buttons on the side or bottom of the screen. These buttons typically include power, volume control, and input selection. You can use them to change channels, adjust volume, and navigate the menu.
• Use a universal TV remote app: You can download a Universal TV Remote app like BoostVision on your smartphone. This app connects via Wi-Fi or infrared (IR) and allows you to control your Element TV.
• Use a universal remote: If your original remote is lost or broken, a universal remote can be programmed to control your Element TV. Follow the instructions that come with the universal remote to set it up for your TV.